PowerH  serijos stiprintuvai

    Tai itin aukštos atkūrimo kokybės ir efektyvumo, novatoriški, nuotolinio valdymо, 3 pakopų, H klasės su DSP ir SMPS, skirti profesionaliems turams, darbui su High-End koncerto garso lygio programomis.

    PowerH 2500

    Load Impedance – 2 O, 4 O, 8 O
    Maximum Midband, Output Power, 1 kHz, THD=1% – 2 O – 1900 W, 4 O – 1450 W, 8 O – 850 W
    Rated Output Power, 20 Hz … 20 kHz, THD <0.1% - 4 O - 1200 W, 8 O - 600 W
    Max. Single Channel, Output Power, Dynamic-Headroom, IHF-A – 2 O – 2050 W, 4 O – 1700 W, 8 O – 940 W
    Max. Single Channel, Output Power, Continuous, 1kHz – 2 O – 1950 W, 4 O – 1600 W, 8 O – 900 W
    Maximum Bridged, Output Power, 1 kHz, THD=1% – 4 O – 3800 W, 8 O – 2900 W
    Maximum RMS, Voltage Swing, 1 kHz, THD=1% – 95 V
    Power Bandwidth, THD=1%, ref. 1kHz, half power @ 4O – 10 Hz … 50 kHz
    Voltage Gain, ref. 1 kHz – 39 dB / 33 dB / 32 dB (switchable)
    Input Sensitivity, at rated output power @ 8O, 1 kHz – 0 dBu / 6 dBu / 7 dBu (switchable)
    THD at rated output power, MBW=80kHz, 1 kHz < 0.05 %
    IMD-SMPTE, 60 Hz, 7 kHz  < 0.05 %
    DIM 30, 3.15 kHz, 15 kHz < 0.02 %
    Max. Input Level +22 dBu (9,75 Vrms)
    Crosstalk, ref. 1 kHz at rated output power < -80 dB
    Frequency Response, ref. 1 kHz < 10 Hz ... 30 kHz (± 1dB)
    Input Inpedance, active balanced – 20 kO
    Damping Factor ,1kHz > 400
    Slew Rate – 30 V/µs
    Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain – 109 dB
    Output Noise , A-weighted < -70 dBu
    Output Stage Topology – Class-H Grounded Bridge
    Power Requirements – 100 V – 240 V, 50 Hz – 60 Hz; 100 V, 50 Hz – 60 Hz
    Power Consumption, at 1/8 maximum output power @ 4 O – 1000 W
    Protections – Audio limiters, High temperature, DC, HF, Short Circuit, Back-EMF, Peak current limiters, Inrush current limiters,Turn-on delay, Mains Circuit Breaker Protection, Mains Overvoltage Protection
    Cooling – Front-to-Rear, 5-stage-fans
    Ambient Temperature Limits – +5°C … +40°C (40°F … 105°F)
    Safety Class – I
    Dimensions (WxHxD), mm – 483 x 88.1 x 498
    Weight – 14.2 kg

    PowerH 5000

    Load Impedance – 2O, 4O, 😯
    Maximum Midband, Output Power, 1 kHz, THD=1% – 2O – 3500 W, 4O – 2500 W, 😯 – 1500 W
    Rated Output Power, 20 Hz … 20 kHz, THD <0.1% - 4O - 2100 W, 8O - 1050 W
    Max. Single Channel, Output Power, Dynamic-Headroom, IHF-A – 2O – 4500 W, 4O – 3200 W, 😯 – 1800 W
    Max. Single Channel, Output Power, Continuous, 1kHz – 2O – 4100 W, 4O – 2700 W, 😯 – 1600 W
    Maximum Bridged, Output Power, 1 kHz, THD=1% – 4O – 7000 W, 😯 – 5000 W
    Maximum RMS, Voltage Swing, 1 kHz, THD=1% – 125 V
    Power Bandwidth, THD=1%, ref. 1kHz, half power @ 4O – 10 Hz … 50 kHz
    Voltage Gain, ref. 1 kHz – 41dB / 35 dB / 32 dB (switchable)
    Input Sensitivity, at rated output power @ 8O, 1 kHz – 0 dBu / 6 dBu / 9 dBu (switchable)
    THD at rated output power, MBW=80kHz, 1 kHz < 0.05 %
    IMD-SMPTE, 60 Hz, 7 kHz < 0.05 %
    DIM 30, 3.15 kHz, 15 kHz < 0.02 %
    Max. Input Level +22 dBu (9,75 Vrms)
    Crosstalk, ref. 1 kHz at rated output power < -80 dB
    Frequency Response, ref. 1 kHz < 10 Hz ... 30 kHz (± 1dB)
    Input Inpedance, active balanced – 20 kO
    Damping Factor ,1kHz > 400
    Slew Rate – 35 V/µs
    Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain – 111 dB
    Output Noise , A-weighted < -70 dBu
    Output Stage Topology – Class-H Grounded Bridge
    Power Requirements – 100 V – 240 V, 50 Hz – 60 Hz; 100 V, 50 Hz – 60 Hz
    Power Consumption, at 1/8 maximum output power @ 4 O – 1450 W
    Protections – Audio limiters, High temperature, DC, HF, Short Circuit, Back-EMF, Peak current limiters, Inrush current limiters,Turn-on delay, Mains Circuit Breaker Protection, Mains Overvoltage Protection
    Cooling – Front-to-Rear, 5-stage-fans
    Ambient Temperature Limits +5°C … +40°C (40°F … 105°F)
    Safety Class – I
    Dimensions (WxHxD), mm – 483 x 88.1 x 498
    Weight – 14.5 kg