LX serijos stiprintuvai
Dynacord LX – High-End, H klasės stiprintuvai, pritaikyti stiprinti mažas arba vidutinio dydžio koncertines akustines sistemas. Puikiai tinka darbui teatruose, stadionuose, diskotekose, klubuose bei koncertinėse salėse.
LX 2200
Load Impedance – 2 O, 4 O, 8 O
Max. Midband Output Power, THD = 1%, 1kHz – 2 O – 1600 W, 4 O – 1100 W, 8 O – 600 W
Rated Output Power, THD < 0.1%, 20Hz … 20kHz - 4 O - 900 W, 8 O - 450 W
Max. Single Channel Output Power, Dynamic Headroom, IHF-A - 2 O - 2600 W, 4 O - 1400 W, 8 O - 720 W
Max. Single Channel Output Power, Continuous, 1kHz - 2 O - 2100 W, 4 O - 1300 W, 8 O - 660 W
Max. Bridged Output Power, THD = 1%, 1kHz - 4 O - 3200 W, 8 O - 2200 W
Maximum RMS Voltage Swing, THD = 1%, 1kHz - 78 V
Power Bandwith, ref. 1kHz, THD =1%, half power @ 4 ohms - 10Hz … 60kHz
Voltage Gain, ref. 1kHz - 32.0 dB
Input Sensitivity, rated power @ 8 ohms, 1kHz : +5.8 dBu (1.51 V rms)
THD at rated output power, MBW = 80kHz, 1kHz < 0.05%
IMD-SMPTE, 60Hz, 7kHz < 0.02%
DIM 30, 3,15kHz, 15kHz < 0.05%
Maximum Input Level +22 dBu (9.76 V rms)
Crosstalk, ref. 1kHz, at rated output power < -80 dB Frequency Response, ref 1kHz - 15Hz … 40kHz (-1dB) Input Impedance, active balanced - 20 kohms Damping Factor, 1kHz > 300
Slew Rate – 35 V/µs
Signal to Noise Ratio, A-weighted – 107 dB
Output Stage Topology – Class H
Power Requirements – 100V, 120V, 220V, 230V, 240 V; 50Hz … 60Hz (factory configured)
Power Consumption, 1/8 max. output power @ 4 ohms – 850 W
Protection – Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak current Limiters Inrush Current Limiters, Turn-On delay
Cooling – Front-to rear, 3-stage fans
Ambient Temperature Limits +5° … +40° ( 40°F … 105°F )
Safety Class – I
Dimensions ( W x H x D ) mm – 483 x 88.1 x 384
Weight – 8.15 kg
Optional Accessories:
Rear Rackmount 15.5″ D112 930 (RMS15-CL), Rear Rackmount 18.0″ D112 933 (RMS18-CL), LPN + Lo-Cut Filter D112963 (NRS 90268)
LX 3000